When the roof of a building is assembled using roofing tiles, it is very essential to provide proper drainage system. The drainage canal for the tile roof, known as ridge cap, is made with the help of ridge cap roll forming machine. The ridge cap routes rainwater off the building and protect it from water related damages. Hence, ridge cap roll forming machine is absolutely necessary wherever roof tiles are made. We at Sree Engineering Equipments understand that the ridge cap should have the right dimensions to maintain the strength of the structure. So, our cost-effective ridge cap roll forming machines have high precision and are easy to operate.
Ridge capping is a critical part of the structure of a roof. The metal ridge cap drains external matter like water and rain to outside the building. The ridge cap roll forming machine is sued to make ridge caps of the required dimension. The perfect ridge cap fit perfectly with the roof and amplifies the solidity of the building.
A ridge cap roll forming machine typically consists of a roll station, a cutting station and a controller. The machine is used along with a decoiler machine to feed the sheet into the profile ridge machine. The roll station shapes the plain sheets into the desired ridge profile. The hydraulic cutting station cuts the ridged sheet at the desired length. The entire process can be controlled with a user-friendly controller that is placed away from the machine for safety. The rolls and cutting frame are customized based on the required ridge profile.
Image a tile roof without a ridge cap. Rainwater will not be drawn away from the building in an effective way. Instead, water will fall around your building in all sides which will make it hard to go inside the building or vice versa. Additionally, there is a chance for water to stagnate in some parts which might lead to water damage. To prevent this, installing a ridge cap with tile roofs is mandatory. These ridge caps are made with the help of ridge cap roll forming machine. This machine is used wherever roof tiles are used, in houses and commercial buildings.
| Feature | Specification |
|---|---|
| Roll Forming Machine GC Profile | Approximate 19 Feet |
| Type of material to be processes | PPGL / PPGI |
| Material Width | 407 MM |
| Forming Speed | 12-15 m/min (not include cutting time) |
| Control System | PLC Delta |
| Roller Stations | about 9 stations |
| Roller Material | EN 8 Steel, with Hard Chrome Coating |
| Shaft Material | EN 8 Steel |
| Diameter of Shaft | ￠66mm |
| Main Motor Power | 5 H.P |
| Hydraulic Motor Power | 3 H.P |
| Cutting way | Hydraulic cutting (Auto) Front Fully automatic hydraulic cutting, Co - Ordinate with Panel. |
| Cutter material | HCHCR |